CONSOLIDATED BEARING 24130 C/4 Roller Bearings

Min operating temperature, Tmin:-40 °C; Manufacturer Item Number:7318BL1G; Mass:5.83 kg; precision rating:ISO Class 0; Category:Angular Contact Ball; Product Group:B00308; ra max:2.5 mm; snap ring included:Without Snap Ring; Snap Ring:No; Characteristic outer ring frequency, BPF0:4.96 Hz;

Weight / LBS:3.5675; Category:Single Row Ball Bear; Outside Diameter:7.087 Inch | 180 Mil; Inch - Metric:Metric; Characteristic inner ring frequency, BPFI:9.36 Hz; Inventory:0.0; Snap Ring:No; Inner Race Width:0 Inch | 0 Millimete; Harmonized Tariff Code:8482.10.50.68; Characteristic outer ring freq

S:17.5 mm; T min.:-20 °C; e:17 mm; C:25.7 kN; L:94 mm; A:32.5 mm; T max.:200 °C; H3:90; Weight:1.31 kg; B:42.9 mm;

H2:64 mm; L1:78 mm; Recommended tightening torque for set screw:8 Nm; B:42.9 mm; N1:16 mm; S:17.5 mm; d:34.92 mm; H1:89 mm; T min.:-20 °C; T max.:100 °C;

D:63 mm; Fatigue limit load, Cu:6.4 kN; Characteristic outer ring frequency, BPF0:9.82 Hz; B:17 mm; e:0.42; Characteristic rolling element frequency, BSF:8.88 Hz; Characteristic cage frequency, FTF:0.45 Hz; Characteristic inner ring frequency, BPFI:12.18 Hz; d:38 mm; Min operating temperature, Tmin:

A1:27 mm; C:25.7 kN; S:17.5 mm; C0:15.2 kN; T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; L1:35 mm; T max.:200 °C; N:M12; J:68 mm;

T min.:-40 °C; B1:43.7 mm; Recommended tightening torque for set screw:8 Nm; B2:18.3 mm; C0:20.8 kN; D:85 mm; r:1.1; m:6.5 mm; T max.:100 °C; B:30.2 mm;

D:160 mm; da max:119 mm; Characteristic rolling element frequency, BSF:7.82 Hz; ra max:2 mm; Fatigue limit load, Cu:2.6 kN; rs min:2 mm; Static load, C0:65.5 kN; Dynamic load, C:72.5 kN; Characteristic cage frequency, FTF:0.44 Hz; Da max:151 mm;

A2:70.7 mm; G:R1/8"; d:60.32 mm; S:25.4 mm; Dz:120 mm; Designation of closed end cover:SCC212; J:202 mm; Designation of housing:FLE212N-; s1:32.55 mm; N:18mm;

da min:40 mm; d:38 mm; Lubrication hole on inner ring:Non/No; B:30 mm; ras max:0.3 mm; Brand:NTN; Mass:0.07 kg; Precision class:P0; rs min:0.3 mm; F:43 mm;

N1:19 mm; A:32 mm; T min.:-20 °C; T max.:200 °C; C:12.8 kN; J:97 mm; H:33.3 mm; Recommended tightening torque for set screw:3.7 Nm; N:11mm; L:130 mm;

H3:140; d:47.62 mm; J:132 mm; T min.:-20 °C; L:175 mm; e:16 mm; B1:66.6 mm; C0:37.8 kN; Recommended tightening torque for set screw:16.8 Nm; A:48 mm;

Weight:4.9 kg; B:55 mm; Designation of bearing:EX218G2L3; B1:72.5 mm; C:96 kN; s1:51.5 mm; C0:71.5 kN; T min.:-20 °C; d1:120 mm; SW:6 mm;

SW:3.97 mm; H:110 mm; A5:30.2 mm; Recommended tightening torque for set screw:8 Nm; s1:24.6 mm; C:31.85 kN; A:31 mm; T min.:-20 °C; Designation of bearing:UC209-26G2; A3:2 mm;

s1:15.5 mm; J:95 mm; H2:65 mm; B:31 mm; Z:45 mm; H:33.3 mm; Designation of open end cover:SCOU204-12; N:13mm; H1:15 mm; C:12.8 kN;